To extend the service life of interior doors, several rules must be observed: – the room temperature should not be lower than 15 degrees and above 35 degrees, and air humidity fluctuate from 26% to 70%;
– It is necessary to avoid excessive humidity and its effects on the door; – you can not expose the door with strong mechanical loads; – During operation, you need to use special tools for caring for wooden products.
A few more clarifications: the doors made of pine are almost not afraid of moisture, but it must be protected from mechanical exposure with metal, cement and cleaning powders. If the house is repaired, the doors must be dismantled or tightened with a hermetically with polyethylene. It is not recommended to process the doors with abrasive powders especially. An important stage in construction is gasification of the house, it is best trusted by experienced masters.
In the case of the formation of scratches on the wooden door, the following restoration actions must be performed: – slightly moisten the damaged place; – with the help of an emery small skin, wipe the damage; – apply a layer of special polishing wax to the surface; – Thoroughly rub the wax with the help of velvet.
In order to prevent approximately every two years, it is necessary to revise the doors and its accessories, that is, cleansing, adjusting and lubrication of door hinges and locks.