If you are a master of all hands, and besides, you are going to work with heating pipes from modern materials, it is quite possible to conduct heat in its own way. But remember: during major repairs it is most difficult and responsible – to replace the heating system.
The house is not only the walls at all, but how comfortable, and therefore, is warm in them. Experts unequivocally advise: if you are not a qualified repairman, you should not even try to shift the heating system yourself. However, having risked working on your own, take better metal plastic, polypropylene or polyvinyl chloride. Steel and copper pipes are best left professionals. The compounds of the system elements are best fixed with pressed fittings than squeezing the type of nipple-gay.
During installation, radiators should be placed flush with each other, at a 5-6-centimeter distance from the floor and window sills. Calculate the markings for support: brackets should be placed in the calculation of one per 1 square meter. And remember: whenever you change the pipes, be sure to drain the coolant – water! In the event that there are no cutting cranes on the pipes, agree to turn off the entire riser. And if in your country house there is still an old heating system mounted a couple of decades ago, do not persuade yourself.
That everything is in order and everything works. This, perhaps, is, only the radiators are already old and have insufficient heat transfer. Heat is distributed unevenly. In addition, the worn -out system is fire hazardous. Now they use small, but powerful radiators, the pipes are “hidden” on the floor or in the walls, and there is nothing to say about the boiler: it is compact, stylish, with convenient work adjustment and high efficiency, and most importantly – economical.
In any construction, a high -quality solution is needed, it should be frost -resistant and moisture resistant. It is barvas that offers plasticizers for solutions at low prices, which will provide all the necessary characteristics for construction solutions.