In many houses and apartments, tiles are laid on the floor, thanks to which the decoration of the house is enriched. However, laying tiles requires certain knowledge. The whole process begins with the preparation of tools, such as tiles, a strip with an abrasive layer, level, gear spatula, rubber hammer and segmenting crosses, as well as with dilution of dry adhesive mixture. You also need to take a rag that will be used to wipe the tiles. After that, you need to clean the floor and degrease its surface. It is worth noting that the contact of adhesive substance with the skin of the hands is undesirable, so you need to carry out all the work in rubber gloves.
Today, a lot of work is recommended to be done in protective gloves, since you can protect yourself from any damage. Protective rubber and other types of gloves are made by many companies. There are also many companies that produce other types of goods. They also build everyday life winter winter, while they are seasons in which such households can be used one hundred percent.
Next begin to apply glue to the floor. To do this, determine the most illuminated angle and adhesive mixture is applied to the floor. Since glue dries in 10-30 minutes, do not apply it to a large area. After that, you need to place crosses on the floor, thanks to which the structural basis of the floor will be formed. The next stage: you need to take the tile and press it tightly to the floor surface, while tapping it with a hammer. This is for a tight fit. When laying tiles, the level is used. When the tile laying was over, it is wiped with a rag and after two days the seams are wiped.