Today often with glazing the balcony is made and its removal. The advantages of this process are that the space of the balcony increases significantly, at the same time, this will install the window sill inside.
Prepare all the necessary tools before starting work. You will need: a welding machine, a grinder, a mask for working with a grinder, a hammer, a crowbar, level, chalk, a drill, a set of drills, 4 anchors, a primer, a brush, a profile pipe.
Start the process of removal by measuring the length of the balcony. This is necessary in order to determine the size of the removal. As a rule, in this case, the value does not exceed 30 centimeters. If there are no side walls, you must also take care of calculating their size. After that, you can purchase a profile. Next, cut off the old railing, leaving the columns on which they were fixed. Cut a piece of profile using a grinder.
It is worth noting that these work can be partially done independently, only using the help of the welder, however, glazing with removal will be performed better and as soon as possible only a professional master.
Then it is necessary to set the level of the profile. After all the elements are exhibited exactly in level, you can proceed with the welding process. Having cut out the jumpers, noting the mounting location, proceed to their final welding with the profile. Next, cut off the profile that will be located on the outer part of the frame. Weld it to the ends of the jumpers.
In the jumper, located on the sides, you need to drill a pair of holes, and then attach to the wall with anchors. Thus, you have collected a frame. After you can beat off the slag and primed the entire structure.