The need to create new openings often occurs in the process of repair and construction work. They are cut into a technology that allows you to create the necessary openings without serious efforts. Now the sewage vehicle is mostly used to install it, they are mainly installed by those who have large cottages and country houses.
In particular, the opening for the window is cut out in a brick wall, the thickness of which is 22 centimeters. Initially, only one brick is cut out of the masonry. In this case, this is done from the center of the pre -marked zone by means of a hammer and a chisel. It is recommended to use a special construction support on top, but to avoid the collapse of the cut through the opening. Only then another row of bricks is cut out on the required window width. So that brickwork does not settle at this time, it is necessary to lay a special charcoal made of galvanized steel. After the full strengthening of the upper part of the opening, you can proceed to cutting the rest.
But to cut the doorway for the door, you need to pre -marqu a new position on the wall, and then start cut the cavity on top. The central part in this case will be maintained using support and bracket, while the upper one is treated with lime solution. Next, the support is removed, and the rest is cut out in the same way.