More recently, stretch ceilings came to our use. But today it is a very popular type of ceiling in the apartment.
Before installing stretch ceilings in the apartment, you must choose a specific type:
– harpoon. PVC film with a thickness of 0.17-0.2 mm. Before installation, a special pattern of the ceiling is made according to a pre -measured room. To tension the ceiling of the film, there should be slightly larger than the size of the ceiling. On the edge of the film, a wedge -shaped tape is stuffed – harpoon. During the installation process, the tape with a special spatula is made in profile for installation.
But before pulling the film, it must be heated to 60-70 degrees. With the help of a harpoon, the ceiling is installed very quickly and efficiently. Moreover, as the film cools down, it is pulled. The plus of this type of ceiling is that in a stretched form it is absolutely even and does not sagging anywhere. This species can also be dismantled in parts if you are flooded and installed back. The only negative is the seams, but they are not very striking.
– Cleem. Special fabric is impregnated with vinyl. The size of the material depends on the width of the room in which the ceiling will be installed. Make a small wage. T. e. The material on the ceiling goes a continuous cloth. In this regard, these ceilings are seamless. When installing there is no need to heat the material. It is attached to a special profile, which is installed around the entire perimeter of the room. Insert the material and fix it with wedges. Having fixed, pull the material until the tension is visible. If excess material appears, then it must be trimmed around the perimeter. Plus: not expensive enough. Minus: in case of flooding, you will need to dismantle the entire ceiling, t. e. it cannot be re -.