Preparation of the wall. First you need to clean the wall from old wallpaper. To do this, you need to soak them well with water, and then remove, the remains can be cleaned with a spatula. After the wall dries well, it must be treated with coarse -grained sandpaper, clean the wall of dust and cover with a layer of primer. The primer needs to choose special for liquid wallpaper.
How to glue. Prepare a wallpaper mixture strictly according to the instructions that should be in the package. Most often, the mixture is diluted with warm water in a proportion of 1: 3. The wallpaper mixture must be stirred very carefully so that all lumps disappear, and the mixture acquires a homogeneous consistency. Almost all types of liquid wallpaper add dyes. Adding and mixing dyes, you can make almost any shade. Further, the container with the mixture is covered with a film and given the right time, it is indicated by the manufacturer on the package.
The finished wallpaper is applied to the wall with a spatula with a layer of 4-5 mm and evenly smeared. It is necessary to apply liquid wallpaper on the wall in parts, for each square meter of wall, after which you need to roll the wallpaper with a roller in order to align the surface well.
If desired, with the help of a roller with rolled on not dried wallpaper, you can make a relief pattern. If something does not suit the work performed, then you need to wet the dried wallpaper well and remove them with a spatula, and then apply another layer. Liquid wallpapers dry up to 48 hours, depending on the room. After the liquid wallpaper completely dried, a varnish coating is applied to them.
You are engaged in specific production and you need high -quality tools? You are lucky! The manufacture of a specification with our help will cease to be your headache. In the shortest possible time, efficiently and at incredibly low prices. You will not regret it.