During repair work in the bathroom, many people want to change the plumbing itself. And the toilet. How to do it correctly and save on plumbing services, we will tell you.
To carry out this type of work, you will need the following tools: the toilet itself with a drain tank, fasteners for it, construction silicone, divorce key, construction glue, all kinds of gaskets and rubber seals.
Want to buy yourself a new fence from corrugated board, but don’t know where? We advise you to visit our site and buy a fence from the corrugated board at a reasonable price.
First you should correctly and accurately mount the new evacuation pipe. After that, it is necessary to put a new toilet to the place prepared for it, but do not fix it. Thus, we will simply check the correctness of the chosen place for the toilet and the possibility of its unhindered fastening.
If everything becomes clear, then you can outline the place of the toilet and the place of fasteners, after which we remove the toilet and drill the holes for fasteners at the marking in the floor.
Now you can put the toilet in the marked place by laying between it and the sewage pipe. Along the perimeter, the bottom of the toilet is smeared with silicone so that it grows well and hermetically with the floor. Then it is worth it to screw the bolts and fasteners.
The final stage in the installation of the toilet is the installation of a drain tank. First we collect the valve of the drain system, and only then we attach the tank to the toilet, not forgetting to install the seal on the output hole for water. Dense rubber washers are also necessary on mounting bolts. Score the bolts of the tank, you need to slowly and alternately so that the tank becomes strictly horizontally and evenly.