The most popular way of warming the cold floor was always the coating of it with a special linoleum, which has a substrate that promotes heat and sound insulation. Laying linoleum is very simple – it rolls like a carpet on the surface of the base. Also in a good way to insulate the floor will be the solution to first lay the eGR stoves, and on them already put either tiles or parquet. Now many began to use a polycarbonate sheet in repair and construction.
To put the fiberboard, all the skirting boards rip off from the old gender. After that, you can put sheets of fiberboard, nailing them for strength. With the help of boostilate glue, the carpet is glued on top. With a cut, the reliability and tightness of the joints between the pieces of the coating is ensured. The most fashionable trend in the market of insulation offers is, of course, the installation of warm floors. The floor level rises, and the heating cable and the connecting cable are installed under it. At the same time, sensors of temperature fluctuations are built into the warm floor system by default. The connecting cables are connected to the temperature sensors, as a result of which the floor is heated according to the specified parameters. Raising the floor when installing warm floors must be carried out by at least 3 centimeters.