Warming of wooden housing is a very laborious process that requires an extremely serious approach. At the time of the construction of the house, the first stage of insulation is carried out, in this case, an intervention heater is used, which can be, for example, Jut or Lnovatin. But after the shrinkage of the house, insulation should be re -performed using moss or flax. However, if the house is a frame or its facade is broken by a crate, then in the space between the crate and the wall should be mounted with mineral wool slabs, which are tightly installed in the openings. This kind of work should be done from the bottom up.
And if you are the owner of a company whose activities are aimed at implementing building materials, then you will certainly need to use the help of professionals who carry out such a service as customs clearance at favorable rates.
A windproof waterproofing superdiffusion membrane should be mounted on top of the insulation material. It is important to choose the right wind protection for the ventilated facade of the log base of the wall, this is this is one of the most important components in insulation. The membrane will not contribute to the penetration of moisture and wind from the outside into the space of the insulation, as well as the walls, but will release air and moisture outward, giving the walls to “breathe”. A crate made of bars of 50 mm should be mounted on top of wind protection. But siding is mounted on the surface of the crate. You can use vinyl siding, which imitates a tree, you can use the House block, in this case the wall will have a log profile that is similar to the present.