For the construction of a summer veranda, a frame is needed with your own hand, which is made of wood with a width of 10 x 10 cm. It is laid on the basis of the lower strapping. Then they mount a number of corner compounds “into the floor of wood”, using a direct lock. Such a strapping should be double, since in the future the lags are installed in it, on which they wallow the floor.
Now you need to fix the racks and install the bars of the upper binding and rafters, which must be attached using grooves 0.5 x 0.5 x 0.5 cm. You can also use nails or brackets for this. Anchor bolts should hold the run and pillars that fit the summer veranda. On the run, which is placed under the slope of the roof, the rafters are attached.
The structure, which is a support for the rafters, must be attached well to the partition of the building and set so that the joints of the roof of the veranda and roof of the building are the most dense. Wooden platbands will also be perfectly decorated, which can be purchased on the site at a fairly acceptable cost.
When erecting a summer veranda, it is possible to independently install a single -sided roof and give it great ruminous than that of the roof of the building. If for the roof of the veranda and the construction you will use the same building material, then in general, all this will look more attractive.
Before the construction of the roof of the summer veranda, it is necessary to install the crate from the boards that are fastened on the rafters. The floor when erected by the veranda can be made from wood, which is installed between 1 and 2 crowns of lags. The best -covering itself and the lags are best treated with an antiseptic mixture and open with paint.