Lighthouses are vertical metal rails that determine the plane of your future wall. With the help of them you will move the rule, evenly applying the mixture to the wall.
The installation of lighthouses is the most responsible and important part of the entire work. The geometry of future walls will depend on the accuracy of the installation of lighthouses, therefore, errors are not acceptable here.
Before, horizontal threads should be pulled at a distance of up to 3 cm from the wall. The threads are attached to small cloves that are clogged into the corners. The distance will depend on how much the curvature of the walls, it can be 5 cm. The threads must be located parallel to each other and run in the same vertical plane. It is not difficult to achieve with a plumb line.
Next under the threads, the lighthouse is stuck and fix it in an upright position so that it does not touch the threads. You can strengthen the position of the lighthouse on the wall with putty and dowels, who will be more convenient for whom.
After you fix it, apply the rule to make sure that the lighthouse is not a curve. If necessary, correct it. Next, proceed to install another lighthouse. It is best to mount the beacons no more often than every 1-1.2 m. The more rarely the beacons are, the easier it is to achieve a flat surface. True, if they are too far from each other, then the work will become very complicated.
Our service will fill your housing with light and sun! Our specificity is the manufacture of customer lamps, lamps for shopping centers, manufacturing large and round lamps, modernization of lighting equipment. Visit Design-Svet and you will be delighted!