Paul Cross – a very serious meticulous work, for the execution of which they use a standard set of tools. But the repair of the floors also requires a special set of tools, with which you can repair both continuous and suspended floors from wood:
– saw for floorboards. Saw, designed so that it is possible to cut the boards across, and the gaps in shopent coatings are longitudinally.
– The grater is floor. The size of the grater exceeds the plaster grater. It is intended to smear the composition for aligning the floor in a large territory. It is easy to process corners thanks to a pointed nose.
– The float float. They smear the glue on the flooring to get into the grooves, they can still remove ceramic tiles.
– steel float or grater stucco. They are aligned with a cement layer and composition in order to cover a continuous layer. Also, with its help eliminate damage to the walls of plastered.
– hammers. You will need a small hammer that has a cross connection for clogging nails.
– Nail. They score floor pins, tear out nails, pins and pins.
– Abrasive bar. Grind the solid floors after the composition has been used to equalize.
– Zenkovka conical manual. With it, make a recess in which the head of the secret screw is then deepened.
– Floor pins. Nails without hats (“tesen”) with which the flooring boards are nailed. These nails, passing through a tree, fix it.
– Loruvial detector and crossbars. Determines the location of the crossbars.
– cable detector and pipes. Determines the locations of communications that are under the suspension floor of wood.
– nails. They are fixed by temporary boards of flooring or lining (lining boards).