Very often, mirror panels and tiles are used for visual expansion of the space of rooms, which linen the ceiling and walls. The technology of facing such products includes the features of work with ceramic tiles (in the process of laying) and with glass (during cutting, drilling holes, etc. p.). When facing surfaces, tiles almost always need to cut products. When working with mirror tiles, the same recommendations should be followed as when working with glass and as a tool for cutting you need to use glass cutter, not a tile, since the products are characterized by fragility and easily break. It will also not be superfluous in your free time to find out how to make a cutting board on the Internet.
The laying of mirror tiles is carried out in the same way as ordinary ceramic. First of all, the walls should be leveled, otherwise all irregularities will become more noticeable. To fix the tiles on the wall, you can use a conventional adhesive design designed to facing ceramic tiles. The glue is applied to the wall with a tough spatula with a thin layer, the tile is applied to the wall and crushed. It should be noted that when using a rubber hammer, tiles should be tapped extremely carefully.
To ensure even seams, it is recommended to use plastic crosses that are removed after the solution of the solution, but until its final hardening. The seams should be wiped with the composition corresponding to operating conditions, for example, in rooms with high humidity (bathroom, pool, etc. D.) requires waterproof grout.