The easiest way to lay floors is laminate. The dense fit of each hand to each other allows you to make masonry visually without a single seam. This creates the effect of a continuous surface.
For laying laminated floors is carried out on a pre -prepared screed 3 cm thick. For work, the following tool will be needed: a hammer, a belt, saw, wedges, litter under the laminate, adhesive tape (width 5-8 cm), waterproof putty, polyethylene film.
Laminate laying can be carried out on the old flooring, regardless of its type. The main rule for laying is to lay the laminate only on a flat surface, without flaws. This type of floor will take a little time for its styling and can do any person who can handle a saw and a hammer.
First of all, the board must be freed from the plastic bag and let it lie down in the room for two days. In order to hide the joints of the boards each other, each should be polished with grindingboum number 320. grinding angle 45 degrees.
If you are laying on tiles, solid linoleum, wood, then you need to glue the intermediate layer (polyethylene, foam rubber). If you put cement, then it needs to be fixed with polyethylene.
Before laying a laminate, it is necessary to make sure that the floor will not interfere when the doors are opened, whether the skirting boards and platbands on the doors are removed.
The masonry is carried out in the same direction as the beam of light. Moreover, in the process it is impossible to open windows for ventilation. Start masonry, fixing the boobs among themselves in the grooves. By laying the laminate, you should leave distances from wall to laminate up to 1 cm so that the floor can breathe. In the end, they will be covered with plinths. Minor pollution of the floor can be eliminated with a damp cloth. And daily – just wipe the floor.