Surely, many people know that before gluing wallpaper walls, you must first process it properly. As a rule, this is done using a putty. How to put the surface properly properly?.
First, of course, you need to prepare the walls, that is, clean them of old coatings and dirt.
In addition, it does not hurt to cover all the furniture that remained indoors, for example, with a film.
After the walls are prepared, you can prepare the mixture. When using dry putty, just dilute it with water in the right proportion and mix it manually or mechanically. As a rule, many mixtures before starting work need to give some time to stand. Then you can start directly to work.
Preferably before applying a little moisturize the surface. A putty is applied either with a special gun or an ordinary spatula. Experts advise using several spatulas when working: wide and narrow. A corner spatula is used to work in the area of corners.
Too thick layer should not be applied, the width of up to 1.5 mm will be sufficient. Start your work with especially problematic places of the surface, for example, recesses and recesses that require alignment. And then distribute the mixture over the entire surface of the wall. The next day, when the putty is completely dry, it needs to be leveled. Use a grinding grater for this.
The holiday season will come soon and you need to think about rest. The best rest at sea! Anapa is a wonderful boarding house boarding house Fairy 3 prices for a full vacation. There are excellent conditions for living, a shady alley runs along the way to the sea.