This method of floor cladding is good because there is no resonance at the time of walking around the room. When lining the floor, through thin flooring, it is better to use glue, which does not contain the water part in its composition, as this will allow you to become more flexible.
This circumstance is a guarantee that the facing coating you made will last as long as possible, it will take improved flexibility (various kinds of damage will be less visible and noticeable).
This method is good because there is no resonance when someone paces around the room, which sometimes turns out to be very helpful.
First of all, you will need: floor boards, roulette, spatula, wedge, glue glue, sponge.
So, the first thing to do is to put at the base of the walls of the wedge, their width should be at least 5 millimeters. Next, lay the first row of floor boards relative to one of the walls, it is done along the walls, of course. Use a spatula to cover a certain area for the glue, while trying to apply even paths, which in turn will be perpendicular to the parties to the sides. Glue is applied directly to the grooves on the ends and sides of the boards. First of all, the connection of one plank with a respectively adjacent plan for it, after which, press it to the layer of glue on the Podnastille. Remove the excess glue by means of a sponge. Continue the laying of the boards in a checkerboard pattern, that is, each subsequent row will be stacked with a displacement of about half or even a third of the next board. Now you can remove the wedges at the base of the wall and engage in the installation of skirting boards.
Estate floor slabs are of special strength. They are light and simple during construction and transportation. Walls using an overlap from aerated concrete are characterized by low thermal conductivity and pass the minimum noise. Aerated concrete is not a fuel, and in case of fire, the focus of the fire will be local.