If you decide to replace the washbasin in your bathroom, before that you need to correctly dismantle the old washbasin. And the installation of a new washbasin must be done so as not to damage it, as well as the surface on which it is installed. Therefore, all actions should be performed very carefully. Before proceeding to dismantle the washbasin, do not forget to make sure that the water supply is blocked. After repair work, you will need cleaning apartments of St. Petersburg at competitive prices.
Then unscrew the nut with which the mixer was attached, remove the flexible or tough eyeliner and remove the old mixer. After that, remove the siphon that connects the sink and sewer. In this case, it will be necessary to gently promote the nuts with the bottom of the sink and disconnect the siphon from the drain output. At the same time, be sure to not forget to drain water from the siphon. In the event that it is also planned to replace the siphon-disconnect it from the drain pipe and temporarily plug the hole with any improvised means. An ordinary cork or rag is suitable here. This will help to provide protection against the penetration of an unpleasant odor from the sewer into the bathroom. When this work is done – remove the washbasin from its support – cabinets, pedestals, brackets and other things.