For a natural wooden floor, a great choice is the use of wood as pine. But how to install such a sex. First you need to mark – for this, at a height of one meter above the floor level, a strictly horizontal line is drawn, from which lines are laid down for each layer. A bitumen -based coating for waterproofing is laid on the concrete base, then the thermal insulation and protection from extraneous sounds came. To do this, the floor is covered with slabs from fiberboard or filling the layer of granular perlite.
Want to undergo waterproofing with liquid rubber, but don’t know where? We advise you to attend our site and we have training inexpensively. You will also find a lot of useful information on our site.
Then the layer is aligned, the bars are laid – the lags, and the height drop is compensated using additional sheets of wood -fiber slab. Do not forget about the ventilation gap between the walls, which should be at least 3 mm. If pipes run along the walls, then an additional lag is laid for their protection, screwed to the slabs. So the turn of pine boards came to join battle. They are laid across the lag and are knocked down by wedges or tightening reinforcement. And in order to protect the floor from expansion when humidity changes, the gap with the wall should be 10 mm, which will be closed with a skirting board.