Before you proceed to grout of the seams, make sure that the solution is well dried and the tile finally grasped.
A high -quality grout is able to hide the defects of the styling, and careless on the contrary, ruin the entire appearance. Switch grouts are carried out either with a mixture based on cement, or based on epoxy resin.
Cement grouts are of various colors. Apply with a rubber spatula. Dry for twenty to thirty minutes. After drying the seams, the surface is polished with a cotton rag. Due to the fact that this type of grout can cause irritation, when working with it, it is better to use special protective devices. There is an opinion that cement grout is not suitable for rooms with high humidity.
Epoxy grout is resistant to chlorinated water, smooth and durable. It dries quickly enough, a special grout is used to clean the surface from excess grouting. The downside of the epoxy grout is that because of her viscosity it is quite difficult to work.
After the grout ends, a sealant is applied to the seams to protect against absorption of excess moisture.