If you have wooden doors of the old -style or doors from the fiberboard and their appearance and their appearance has long deserves negative emotions only, then you should think about the complete restoration of these interior elements. Capital repair of such structures is carried out similarly to operations with entrance doors. The doors themselves must be dismantled from the loud. Set the doors on a flat plane and visually inspect. If the old paint has no visible damage and is still firmly held on the surface, then it is not necessary. It will be enough just to ruminate the door with a sandpaper and paint with oil enamel several times.
During the doors painting with a spray gun, be careful if you have a double -leaf shower glass in the bathroom, which can fall with a solvent paint. Close it with a film or cover made of dense material. But if the paintwork in the door sections is exfoliated, then it must be burned with a building hair dryer.
In small areas, clean the paint with scrapers after heating it to high temperature. Show the door and trample on all sides. Particular attention should be paid to the facial surfaces – it is advisable to putty the sheer. All transitions and influxes of putty must be cleaned with abrasive materials, and after grinding, clean the doors from dust and putty particles. If you want the paint to stay on the surface for a long time, primed the door with a ray and only after that apply layers of new paint. After the painted door dries, it must be installed in place and nailed to the loud -pounds.